Volume 7, Issue 6, November 2018, Page: 68-78
Heat Power Equipment Sample Tests Using Time-Series Techniques
Trukhanov Vladimir Mihailovich, Department of Heat Power and Heat Engineering, the Moscow Power Engineering Institute, Volzhsky, Russia; Department of Automation of Manufacturing Processes, Volgograd State Technical University, Volgograd, Russia
Sultanov Makhsud Мansurovich, Department of Heat Power and Heat Engineering, the Moscow Power Engineering Institute, Volzhsky, Russia
Gorban' Yuliya Anatolyevna, Department of Heat Power and Heat Engineering, the Moscow Power Engineering Institute, Volzhsky, Russia
Kukhtik Mikhail Petrovich, Department of Automation of Manufacturing Processes, Volgograd State Technical University, Volgograd, Russia
Received: Nov. 4, 2018;       Accepted: Dec. 17, 2018;       Published: Jan. 23, 2019
DOI: 10.11648/j.epes.20180706.11      View  108      Downloads  54
Abstract
The article is concerned with the problem of planning of the amount of sample tests of heat power equipment components using time-series techniques. In the operation process of thermoelectric power stations (TPS) their expensive components (turbines, bearings, oil systems, generators, transformers, pipelines etc.) require securing of preset level of reliability and safety. For achievement of this aim it is necessary to develop corresponding plan of sample tests. Peculiarity of heat power equipment components is that they are devices consisting of elements’ totality of mechanical, hydraulic, pneumatic, electronic and other types. The basis of the proposed sample tests amount planning technique is the condition of test sample restorability after failure through improvements. In this case, the risk of developer (supplier) is assumed to be close to zero (α = 0). Improvement will be considered effective if carried out tests are successful in the same amount after improvement. Novelty of the proposed test amount planning technique for one preset level of reliability allows getting required output characteristics of heat power equipment in shorter period.
Keywords
Test Amount Planning, Components, Reliability, Distribution Law
To cite this article
Trukhanov Vladimir Mihailovich, Sultanov Makhsud Мansurovich, Gorban' Yuliya Anatolyevna, Kukhtik Mikhail Petrovich, Heat Power Equipment Sample Tests Using Time-Series Techniques, American Journal of Electrical Power and Energy Systems. Vol. 7, No. 6, 2018, pp. 68-78. doi: 10.11648/j.epes.20180706.11
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Sultanov M. M. Assessment of reliability, extension of service life and optimization of repair of thermal power plant equipment and power systems. –Volzhsky: Volzhsky branch of MPEI , 2016.–100 p.
[2]
Lloyd D., Lipov M. Reliability. –M.: Soviet radio, 1964. – 687 p.
[3]
Reliability and efficiency in engineering. T. 1. Methodology. Organization. Terminology/ Under edition A. I. Rembezy. – M.: Engineering, 1986. – 224 p.
[4]
Reliability and efficiency in engineering. T. 6. Experimental testing/ Under edition R. S. Sudakova, O. I. Teskina. – M.: Engineering, 1989. – 376 p.
[5]
Sultanov M. M., Truhanov V. M. Mathematical model of change of output operational characteristics of steam turbines of TPP // The reliability and security of energy. –2017. – T. 10, №1. – p. 42-47.
[6]
TruhanovV. M. Reliability of engineering products. Theory and practice: textbook. – 2nd edition, revised and supplemented/ V. M. Truhanov.–M.: Edition «Spektr», 2013. – 334 p.
[7]
RD50-650-87. Methodical instructions. Reliability in technology. Composition and general rules for setting reliability requirements. – M.: Edition of standards, 1988. – 23 p.
[8]
RD 50-109-89. Recommendations. Reliability in technology. Ensuring product reliability. Ensuring requirements. –M.: Edition of standards, 1989. – 16 p.
[9]
Truhanov V. M. Reliability in technology. M.: Edition «Spektr», 2017. – 634 p.
[10]
Sultanov M. M., Truhanov V. M., Arakelyan E. K., Kulikova M. A. Methods of achieving and ensuring a high level of reliability and safety of power equipment of TPP, HPP, NPP at all stages of the life cycle, ISSN: 2312-055X, 2018. – 6-14 p.
[11]
Truhanov V. N., Sultanov M. M. Estimation technique of corrective effects for forecasting of reliability of the designed and operated objects of the generating systems, ISSN: 1742-6596, 2017.–1-13 p.
[12]
Truhanov V. M., Sultanov M. M., Kukhtik M. P., Gorban Yu. A. Mathematical model of predicting of failures by statistical method at testing of prototypes of heat-power equipment of power supply systems of TEHS// The reliability and security of energy. – 2018. – T. 11, № 3. – p. 235-240.
[13]
Suleimenov B. A., Sugurova L. A., Suleimenov A. B., Suleimenov A. B., Zhirnova O. V. Synthesis of the equipment health management system of the turbine units' of thermal powerstations.–MECHANICS & INDUSTRY, 2018.
[14]
Agrawal V., Panigrahi B. K., Subbarao P. M. V. Increasing Reliability of Fault Detection Systems for Industrial Applications.–IEEE INTELLIGENT SYSTEMS, 2018.
[15]
Salomon D., Motta G. Handbook of data compression.–Springer Science & Business Media, 2010.
Browse journals by subject